Loading... Please wait...

Our Newsletter

Protecta Reuseable Concrete Anchor

  • Image 1
  • Image 2
0.80 LBS
Calculated at checkout

Product Description

The Protecta Reusable Concrete Anchor provides a portable, durable and safe concrete anchor for vertical wall or overhead ceiling applications. It is extremely easy-to-use and is 5,000 lb. fall arrest rated for added safety and flexibility.

Fast, Easy and Safe Installation

Installation is simple and efficient, taking just seconds utilizing standard concrete tools.

Drill a 3-1/2” (8.89cm) -t0 4” (10.16cm) deep hole with rotary hammer and 3/4” (19.05mm) drill bit.
Pull up on the trigger until it’s fully retracted.
Insert anchor into hole until release plug seats against concrete surface.
Pull on the D-ring to set the anchor in place  and connect your personal fall arrest system.

Release of the anchor is just as fast. Simply pull up on the trigger and you’re ready to move to the next location. Refer to instruction manual for complete details.

Anchorage Requirements

The concrete must have a minimum compressive strength of 3000 psi (2,685 kPa). The concrete base material must be at least 5” (12.7cm) thick and the mounting hole location from the edge is dependent upon the concrete thickness and width (refer to
instruction manual for complete details).  

Standards and Warranty

Reliability that saves you worry, time and money. Complies with OSHA and ANSI requirements. The reputation of Protecta stands behind every one of our products supported by a two year warranty on parts and workmanship.


Use vertically or for overhead ceiling concrete applications for added versatility
Portable and reusable anchor provides added jobsite flexibility and lower cost of ownership
Unique forged connection ring provides a compatible tie-off point for added safety
Constructed of stainless steel, aluminum and other non-corrosive materials for a longer service life
For complete safety, 5,000 lbs. (22 kN) fall arrest rated, meets OSHA and ANSI Z359.1


Size: 3/4 inch (19.05 mm)  Capacity: 5,000 Lbs. (22 kN) 
Rating: Single user fall protection up to 310 Lbs. (141 Kg) 
Weight: 0.78 Lbs. (354 g)  Cable Material: Galvanized Steel  Anchor Chocks & Shaft Material: Stainless Steel  Release Plug Material: Zinc Plated Steel  Trigger Material: Aluminum  D-Ring Material: Forged Steel  Standards: OSHA and ANSI Z359.1

Warranty Information

Equipment offered by DBI‑SALA is warranted against factory defects in workmanship and materials for a period of two years from date of installation or use by the owner, provided that this period shall not exceed two years from date of shipment. Upon notice in writing, DBI‑SALA will promptly repair or replace all defective items. DBI‑SALA reserves the right to elect to have any defective item returned to its plant for inspection before making a repair or replacement. This warranty does not cover equipment damages resulting from abuse, damage in transit, or other damage beyond the control of DBI‑SALA. This warranty applies only to the original purchaser and is the only one applicable to our products, and is in lieu of all other warranties, expressed or implied.

Find Similar Products by Tag

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Protecta Reuseable Concrete Anchor to your wish list.

You Recently Viewed...